Hitron Minitrax HCV-851PZ0S4 Скачать руководство пользователя страница 7

Chapter 1. 

Introduction

1.1   Features

The PTZ Dome keyboard controller and the PTZ Dome camera make up 
the building blocks for any surveillance/security system.  Using multiple 
keyboard controllers and multiple dome cameras, no place is too large 
for monitoring. Extensible and flexible architecture facilitates remote 
control functions for a variety of external switching devices such as 
multiplexers and DVRs.

60 Preset positions.
4 Tours consist of Preset, Auto Scan and Tour itself can be 

programmed functions and Preset location. 

4 Auto Scan 

1 Alarm input (OFF / NC / NO) and 2 Alarm state(momentary, timeout).
Programmable user preferences (alarm, preset, title, etc.).
Up to 63 selectable camera addresses.
Built-in RS-485 receiver driver (baud rate 9600bps.).
Clear bubble with black liner (shelter) for concealing the camera.
Optional tinted bubble, wall mount.

24VAC or 12VDC
If use 12VDC power adapter, Use Certified/Listed Class 2 power 

supply transformer only.
Use Certified/Listed Class 2 power transformer only. 

1

Содержание Minitrax HCV-851PZ0S4






































Отзывы: