58
3.8 Resetting to the factory default settings
To reset the Network Transmitter to the original factory settings, go to the Setup>System
>Maintenance web page (described in Maintenance, on page 54) or use the control button
on the network video transmitter, as described below:
• Using the Reset Button
Follow the instructions below to reset the Network Transmitter to the factory default
settings using the Reset Button.
1. Switch off the Network Transmitter by disconnecting the power adapter.
2. Press and hold the Control Button with a straightened paperclip while reconnecting the
power.
3. Keep the Control button pressed until the Power indicator blink.
4. Release the Control Button.
5. When the Power Indicator changes to Green (may take up to 1 minute), the process is
complete and the network video transmitter has been reset.
6.
The transmitter resets to factory defaults and restarts after completing the factory reset.
CAUTION: When performing a Factory Reset, you will lose any settings you have saved.
