Hitron HEV0118H Скачать руководство пользователя страница 55

Страница: 55 / 61

Note: Backup and Restore can only be used on the same unit running the same firmware.

This feature is not intended for multi-configurations or for firmware upgrades.

3.5.7.6 Support

The support page provides valuable information on troubleshooting and contact information,
should you require technical assistance.

• Logs

The network Transmitter support system log information. Click the System Log button to

get the log data.

• Update Server

-. Server Report – Click the Server Report button to get the important information about

the server’s status and should always be included when requesting support.

-. Parameter List – Click the Parameter List button to see the unit’s parameters and their
current settings.

3.5.8 About

The following website will provide the support information for the Network Transmitter

information and operation.

Содержание HEV0118H





























































Результаты поиска

Содержание HEV0118H

Отзывы:

Похожие инструкции для HEV0118H

Бренды по названию

Популярные бренды

Hitron HEV0118H, Руководство пользователя

Результаты поиска

Содержание HEV0118H

Отзывы:

Похожие инструкции для HEV0118H

Бренды по названию

Популярные бренды