Hitron HCB-F9, Инструкция по эксплуатации

Страница: 12 / 72

- 5 -
3) Press the LEFT or RIGHT button if you wish to change mode.
When the LEFT or RIGHT button is pressed, available values and
modes are displayed in order. Please keep pressing the button until
you get to the mode you wish to operate.
4) To finishing the setting without save, select 'END' and then press the
ENTER button. But if you want to keep the setting, enter the CAM SET
menu, select 'SAVE' and then press the ENTER button.
NOTE : If ' - - -' appears at the mode item, it means that is no mode
available to be selected.
<WB>
Press the MENU button to access the "WB" mode.
WHITE BAL.
MODEL
ATW / AWC / MANUAL
R GAIN
1 ~ 70
B GAIN
1 ~ 70
EXIT
1) MODE
- AWC (Auto White Balance Control)
Please press the MENU button while the camera is directed at a piece
of white paper to obtain the optimum state under current illumination. If
the environment including the light source is changed, you have to
adjust the white balance again.
- ATW (Auto Tracking White Balance)
O
This mode can be used within the color temperature range 1,800 K ~
O
10,500 K