WAN/LAN
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
50
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
50
HITRON CGN USER’S GUIDE
3.3
THE SHARED MEDIA SCREEN
Use this screen to manage and share data stored on devices connected to the CGN’s
USB
port. The CGN provides one USB 2.0 host port, allowing you to plug in a USB
flash disk for mounting and sharing through the LAN interfaces via the Samba
protocol (network neighborhood).
NOTE:
This screen is not available unless a logged-in MSO admin user previously
enabled the
USB
option in the
Status
>
Capability
screen; see The
Capability Screen on page 42 for more information.
Click
WAN/LAN
>
Shared Media
. The following screen displays.
DHCP End IP
Use this field to specify the IP address at which the CGN
stops assigning IP addresses to devices on the LAN
(when DHCP is enabled).
NOTE:
Devices requesting IP addresses once the DHCP
pool is exhausted are not assigned an IP address.
Connected Computers
Host Name
This displays the name of each network device connected
on the LAN.
IP Address
This displays the IP address of each network device
connected on the LAN.
MAC Address
This displays the Media Access Control (MAC) address of
each network device connected on the LAN.
Type
This displays whether the device’s IP address was
assigned by DHCP (
DHCP-IP
), or
self-assigned
.
Interface
This displays whether the device is connected on the LAN
(
Ethernet
) or the WLAN (
Wireless(x)
, where
x
denotes
the wireless mode;
b
,
g
or
n
).
Apply
Click this to save your changes to the fields in this screen.
Cancel
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help
Click this to see information about the fields in this screen.
Table 12:
The WAN/LAN > IP Screen (continued)
