HITROL HTM (HPV)-20N Series Скачать руководство пользователя страница 10

Страница: 10 / 15

HTM(HPV)-20N Series

HITROL CO., LTD.

AMP and Wiring

The power specifications of HTM (HPV)-20N Series is AC 90

–240 V and DC + 24 V,

Check and supply the power voltage before wiring, and then connect it to the output
according to use.



LED

- MAIN: Power on/off and operation

state

- SENSOR: Detection of medium
- RELAY: Relay operation



Tact Switch

- Setting button



Terminal Block

-  AC: AC Input power
-  F.G: Field ground
-  DC: DC input power
-  CONTACT 1 and 2: Output (DPDT)

Settings



Auto Setting

Initializes the operation of product or sets it to auto.
- Relay response time: 1 sec.
- Relay return time: 1 sec.
- Relay out: normal closed



Buildup Point Setting

If there is foreign substance on the measuring part of a product, set for detection
above the point.
(

※

However, the built-up medium must come in contact the sensor.)

Press and hold the

button for 1 second to turn on and off the green

LED and thus finish the setting.

Press the

buttons for 1 second to turn on and off the green LED

and thus finish the setting.

Содержание HTM (HPV)-20N Series
















Результаты поиска

Содержание HTM (HPV)-20N Series

Отзывы:

Похожие инструкции для HTM (HPV)-20N Series

Бренды по названию

Популярные бренды

HITROL HTM (HPV)-20N Series, Инструкция по эксплуатации

Результаты поиска

Содержание HTM (HPV)-20N Series

Отзывы:

Похожие инструкции для HTM (HPV)-20N Series

Бренды по названию

Популярные бренды