Hitecsa ACVA STD 1001, Инструкции по установке, эксплуатации и обслуживанию

Страница: 9 / 21

ACVA - ACVBA
Installation, operation and maintenance instructions 9
ELECTRIC CONNECTIONS
Legend
1.
Main power 400/3/50 + neutral
2. Earth
3. Crankcase heater (230/1/50)
4. Time-delay fuses or circuit breaker (MCB) curve D
5. Main power switch
6. Remote control
WARNING!
Before starting installation, service or maintenance, turn off the main power switch in order
to avoid electrical shock that may cause personal damages.
•
Main power supply of the unit should agree with the data shown on the nameplate.
HITECSA will not be held responsible for damages resulted from non observance of the
above.
•
Always use the wiring diagram sent with the unit to make electrical connections.
•
Check that the crankcase heater has been working at least 24 hours prior to the start up of
the unit.
•
Current supply should be within 10% of Volts and Amperes indicated on the unit
nameplate.
•
Do not operate the unit at different current from that shown on the unit nameplate.
•
The installer should put line protection elements in compliance with current legislation.
•
The interconnecting wires should be protected with a tube or put inside a groove channel.
2
1
4
5
3
6