Hitecsa ACVA STD 1001, Инструкции по установке, эксплуатации и обслуживанию

Страница: 3 / 21

ACVA - ACVBA
Installation, operation and maintenance instructions 3
INTRODUCTION
The contents of this manual are designed to assure the correct installation, adjustment and
maintenance of the unit, therefore:
•
Read the instructions with due care and attention.
•
The appliance must be installed, tested and serviced by properly qualified staff
licensed in accordance with the established legislation.
•
The manufacturer declines all liability and warranty coverage is automatically waived,
if electrical and/or mechanical modifications to the unit. Tampering and unauthorized
repairs or modifications to the unit will automatically void the warranty.
•
Observe the safety regulations in force at the time of installation.
•
Make sure that the characteristics of the mains network conform to the data on the
serial number plate placed on the unit.
•
Keep this manual and the wiring diagram with care and make sure that they are
available for consultation by the operator whenever necessary.
•
Packing materials (plastic wrappings, expanded polystyrene, etc) are potentially
hazardous and must be kept out of reach of children. Recycle packing materials in
accordance with local legislation.
•
The units must be used only for the purpose for which they are designed .The
manufacturer bears no responsibility in the case of applications other than the
specified use.
•
Disconnect the unit in the event of breakdowns or malfunctions.
•
If repairs are necessary, use only HITECSA approved service centres and always insist
on original spare parts. The use of non-original parts and/or unauthorized service
centres may result in unsafe operation of the unit.
REGULATIONS AND CERTIFICATIONS
ISO 9001:2008 certification:
HITECSA AIRE ACONDICIONADO S.L.U., trying always to find the
customer satisfaction, has obtained the ISO 9001:2008 Quality System referred to its
production activity. This will results in a continuous determination to improve quality and
reliability of all our products; commercial activities, design, raw materials, production and
after-sales service, are the means to reach our goal.
CE marking:
our machines have got the CE mark, in conformity with the essential requirements
of the applicable EC directives and their last modifications as well as with the national
legislation of each country.