43
+
INC
–
DEC
+
INC
–
DEC
Start
Enter
Start
Enter
Batt type
stop
> 3 seconds
Number
of Cells
Charging
Time
Charging
Current
Charged
Capacity
Battery
Voltage
+
INC
–
DEC
+
INC
–
DEC
Start
Enter
Start
Enter
Batt type
stop
> 3 seconds
Number
of Cells
Charging
Time
Charging
Current
Charged
Capacity
Battery
Voltage
FAST CHG
Professional Balance Charger, Discharger
Hochleistungs Profi Balance
LADER / ENTLADER
Charging Lithium Batteries in Fast Mode
The fi rst line on the left side of this screen shows the type of
battery chosen. The second line shows the user set current on
the left and the user set voltage on the rights. After setting
the current and voltage, press the
„START/ENTER“
key for
more than 3 seconds to start the process.
The next display shows the number of cells you set up as
”R” and the number of cells the processor detects as “S”.
If both numbers are identical, you can start charging by
pressing the
„START/ENTER“
button. If not, press the
„BATT TYPE/STOP“
button to go back to the previous
screen to carefully check the number of cells of the battery
pack before proceeding.
This next screen shows the real-time status during the charge
process. Press the
„BATT TYPE/STOP“
key once to stop the
charge process.
When charging lithium chemistry batteries in the fast charge
mode the charging current will become lower towards the
end of the charge cycle. In fast mode the charging capacity
is slightly lower than in normal charge mode, but charging
time is reduced.
The fi rst line on the left side of this screen shows the type of
battery chosen. The second line shows the user set current
on the left and the user set voltage on the right. After setting
the current and voltage, press the
„START/ENTER“
key for
more than 3 seconds to start the process.
The next display shows the number of cells you set up as „R“
and the number of cells the processor detects as „S“. If both
numbers are identical, you can start charging by pressing the
„START/ENTER“
button. If not, press the
„BATT TYPE/STOP“
button to go back to the previous screen to carefully check
the number of cells of the battery pack before proceeding.
This next screen shows the real-time status during the charge
process. Press the
„BATT TYPE/STOP“
key once to stop
the charge process.
Charging Lithium Battery in Balance Mode
This function is for balancing the voltage of Lithium-polymer
battery cells individually while charging. In the balance mode,
the battery needs to have a balance lead to connect to the
balance port at the right side of the charger and the battery‘s
power leads to the output of the charger.
Charging in this mode is different from the normal modes
because the built-in processor monitors the voltage of each
individual cell and controls the input current fed into each
cell in order to equalize the voltage.
