28
AC/DC-Input, Professional
Balance Charger, Discharger, Multicharger
G
When powered on for the first time, your X1 RED charger
will load with default values in the programmable user
settings. The screen displays the following information
in sequence and the user can change the value of the
parameters on each screen.
When you are ready to change the parameter values in
the program, press START/ENTER to make it blink, and
then select the appropriate values with INC or DEC. Store
the value by pressing START/ENTER once.
System Settings
Item
Selection
Description
SYSTEM SETUP
DC Input:
Cut Caps: 5000mAH
Cut Time: 120min
Cut Temp: 50
0
C/122
0
F
11.0V
10-12V
Users can change the DC Input low voltage warning as
necessary. The default value is 11.0V
SYSTEM SETUP
DC Input:
Cut Caps: 5000mAH
Cut Time: 120min
Cut Temp: 50
0
C/122
0
F
11.0V
OFF/(100-5000 mAh)
This program sets the maximum charge capacity
that will be supplied to the battery during a charge.
If the delta peak voltage is not detected nor has the
safety timer expired for any reason, this feature will
automatically stop the process at the selected capacity
value. Default is 5000mAh.
SYSTEM SETUP
DC Input:
Cut Caps: 5000mAH
Cut Time: 120min
Cut Temp: 50
0
C/122
0
F
11.0V
OFF/(1-720 Min)
When starting a charge process, the built-in safety
timer automatically runs at the same time.This is pro-
grammed to prevent the battery from overcharging if it
proves to be faulty or if the termination circuit cannot
detect that the battery is fully charged. The value for
the safety timer should be generous enough to allow a
full charge of the battery. Default is 120min.
SYSTEM SETUP
DC Input:
Cut Caps: 5000mAH
Cut Time: 120min
Cut Temp: 50
0
C/122
0
F
11.0V
OFF/(200C/680 F -
800C/1760F)
Chemical reactions in the battery cause it to heat
up during charging/discharging If the specified tem-
perature threshold, which can be measured with an
optionally available temperature sensor, is reached, the
charging procedure is automatically stopped.
SYSTEM SETUP
Unit:
Resting: 10 Min
Delta Peak: 4mV
Bal. Connection: ON
Celsius
Celsius
Fahrenheit
Display the temperature in
Celsius or Fahrenheit.
