HITEC RDX2 Mini, Инструкция по эксплуатации

Страница: 20 / 34

20
Charger Operations [cont.]
INC
INC
L i P o B A L A N C E
2 . 0 A 1 1 . 1 V ( 3 S )
91%
12 ..14 V
1.5A 0 0 : : : 5 0 1 2
2 5 % B A L
B:
A:
6.3V CHG NiM H
4 0 7 0 4 0 6 0 V
4 1 1 0 0 V
91% 12 ..14V
1.5A 0 0 : : : 5 0 1 2
r
DEC
DEC
DEC
R shows the number of cells detected by the charger and S is
the number of cells set by you at the previous screen. If both
numbers are identical, press START/ENTER to start charging
process
If the user charges two batterries simultaneously, this will be
started to display after the twin-channels have been working
for 10 seconds. And the user is only allowed to be back to the
working interface that started lastly with START/ENTER and
channel switch button
Real-time status: battery icon, percentage of charge or
discharge. Charge current, battery voltage, elapsed time &
capacity
Voltage of each cell in the battery pack when the battey is
connected with the balance lead.
Final voltage when program ends.
Saftey timer ON and duration of time in minutes.
Capacity cut-off ON and the setting value capacity.
7. Charging Status Monitor
During charge process, The real-time status will be shown on
screen