HITEC Multi-Charger X2-400, Инструкция по эксплуатации

Страница: 4 / 28

02
INTRODUCTION
Specifications
The Hitec X2-400 allows you to charge up to two different batteries simultaneously. The
charger will automatically charge all 4 batteries at a time to their maximum capacity. Addi-
tionally the batteries being charged do not need to have the same configuration or the
same chemistry. Therefore you can connect any one of a NiMH/NiCD/LiPo/LiFe battery
into any of the charging ports. This eliminates the time consuming efforts of charging all
your batteries separately.
Discharger Power 25 Watts per Channel
Power Source
Charge Power
Cell Count
Dimensions
Net Weight
12 Volt Car Battery or
12-18 Volts DC 60 AMP Power Supply
400 Watts per Channel (800 watts total)
1-6 LiPo/LiIon/LiFe cells
1-15 NiCd/NiMH cells
1-10 Lead-Acid cells (2V - 20V)
8.9” x 6.7” x 2.6”
3.4 lbs.
Operating Voltage Range
12 - 18 Volts DC
Current Drain for Balancing Lithium 200mA Per Cell
Charge Current 0.1 - 20 Amps
Discharge Current 0.1 - 5.0 Amps