<RX>
1.
RX-click the Link button on the power (4.8V) is applied to the link SW release.
2.
RX intersection Blinks the LED on the end of the BLUE color.
3.
The power OFF and then ON.
<TX>
9.
RX and press ESC SW BINDING is complete.
10.
For about 5 seconds, then press ESC SW twice more, go to the main menu screen.
(Warning – Available LINK range of Tx and Rx is between 45cm and 5M. If LINK cut off more than 1 second because of the external
environment in the Scan Mode or one of transceiver’s power is turned off, you have to turn off both the Tx and Rx then LINK again.)
Servo Monitor Mode(TX and RX are available in the state BINDING)
1.
From the main screen, press the Dial SW, entry menu screen.
2.
Dial SW keep turning down the SYSTEM menu.
3.
SERVO menu, position the cursor, press the Dial SW. (Go to the MONITOR screen.)
4.
Dial SW Lift up again, go to the TEST menu, press the Dial SW.
(Go to the Speed adjustment menu.)
5.
Dial SW by turning the variable speed servo (up to make it faster.)
6.
ESC twice while pressing the stop menu.
Transmitter Scan Mode
1.
LYNX 4S Power ON, Move to SYSTEM TAB.
2.
RX-SCAN Menu button entered will appear asking if you want to scan.
"You will run a scan is it? Then all you need to rebind RX! "
3.
YES by pressing SCAN is executed.
4.
Process again after complete to BINDING of the transceiver.
Содержание Lynx 4S
Страница 1: ......
