2-6
StarBoard
FX-77G
Ⅱ
Appendix
English
2.2.2 Start Method(Mac version)
(1) Connect devices following the page 1-12.
(2) Power up the projector.
(3) Power up Mac to start up Mac OS.
(4) Adjust the position of the projector so that the Mac screen projected by the
projector is within the pen input active area (see page 1-5).
(5) Select "Go"
→
"Applications"
→
"StarBoard Software" to start StarBoard
Software.
(6) Select "MENU" on the StarBoard Software toolbar
→
"Settings"
→
"StarBoard"
→
"Check Connection," and then check the connection.
If the "StarBoard is not connected" message appears, StarBoard Software has not
detected the StarBoard. Check whether the StarBoard and Mac are connected properly.
Connected No
Connection
If they are connected properly, the "StarBoard is connected" message appears. If the
indication does not change even though you have checked the connection, there is
likely to be some problem. For details, see "3. Appendix Troubleshooting " on page
3-1 in this user's guide.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar
→
"Settings"
→
"StarBoard"
→
"Calibrate"
→
"OK". and
then perform position alignment.
