Hitachi ZAXIS 450LC-3 Скачать руководство пользователя страница 161

Страница: 161 / 477

OPERATING THE MACHINE

5-3

CONTROL LEVER (4 Way Multi Valve)

(Optional)

The control lever operation pattern is selected to one of four

patterns, Y-type (ISO pattern), H-type (Hitachi pattern), M-type

and K-type by shifting selector valve (1).

WARNING: To prevent a serious accident or personal

injury and/or death from occurring due to erratic

machine movement, follow the instructions below.

• Appoint a coordinator responsible to selection of the

multi control lever operation pattern.

• Attach a lock to the selector valve. Prohibit that no

personnel other than the coordinator change the

control lever operation pattern.

• After changing the control lever operation pattern,

check that the direction of the machine movement

agrees with the control lever operation pattern

described on the operation instruction decal. Be sure

to change the operation instruction decal to that

matching the new machine control lever operation

pattern. The control lever operation pattern decal

is affixed on the right side of the operator’s seat as

illustrated to the right.

• Never attempt to change the control lever operation

pattern without stopping the engine. The machine

may be unexpectedly moved, possibly resulting in

personal injury or death. Whenever changing the

control lever operation pattern, stop the engine first.

Then, rotate the selector valve (1) to the desired

control lever operation pattern position and lock the

valve up.

• After changing the control lever operation pattern,

make it rule for the coordinator to instruct the

operator the new control lever operation pattern.

• Rule that the coordinator is responsible to retain and

stow the key for selector valve lock (2).

• Never place any part of body beyond window frame.

It could be crushed by the boom if boom control lever

is accidentally bumped or otherwise engaged. If

window is missing or broken, replace immediately.

Prevent possible injury from unexpected machine

movement.

Make sure you know the location and function of each

control before operating.

When a lever is released, it will automatically return to neutral,

and that machine function will stop.

M1U1-01-001

SS4288252

SS4288250

SS4288251

SS4288249

M1U1-01-117

M178-05-013

Содержание ZAXIS 450LC-3






























































































































































































































































































































































































































































































Результаты поиска

Содержание ZAXIS 450LC-3

Отзывы:

Похожие инструкции для ZAXIS 450LC-3

Бренды по названию

Популярные бренды

Hitachi ZAXIS 450LC-3, Руководство оператора

Результаты поиска

Содержание ZAXIS 450LC-3

Отзывы:

Похожие инструкции для ZAXIS 450LC-3

Бренды по названию

Популярные бренды