ENGLISH
Mark
Part name
Description
27(L) Water Pump 2 (WP2)
When there is a second temperature application, a secondary pump is the circulating pump for
the secondary heating circuit.
28
Aquastat security for circuit 2 (WP2)
Terminals intended for the connection of the Aquastat security accessory (ATW-AQT-01) for
controlling water temperature of the circuit 2.
29
30(N)
Electrical Heater DHW Output
If DHW tank contains an electric heater, the air to water heat pump can activate it if the heat
pump cannot achieve the required DHW temperature by itself.
31(L)
32(C) Common line
Common terminal for the 3-way valve for DHW tank.
33(L) 3-way valve for DHW tank
The air to water heat pump can be used to heat DHW. This output will be on when DHW is
activated.
34(N) N common
Neutral terminal common for 3-way valve of DHW tank and outputs 1 and 2.
35(L) Output 1 (3-way valve for swimming
pool) (*)
The air to water heat pump can be use to heat swimming pool. This output will be ON when
swimming pool is activated.
36(L) Output 2 (Water pump 3 (WP3)) (*)
When there is a hydraulic separator or buffer tank, additional water pump (WP3) is needed.
37
Output 3 (Auxiliary boiler or electric
heater) (*)
The boiler can be used to alternate with the heat pump when the heat pump cannot achieve the
required temperature by itself.
A water electric heater (as accessory) can be used to provide the additional heating required on
the coldest days of the year.
38
39
Output 4 (Solar) (*)
Output for solar combination with Domestic Hot Water Tank.
40
?
N O T E
(*): Inputs and outputs explained in the table are the factory-set options. By means of the unit controller, some other inputs and outputs functions can
be configured and used. Please, refer to the Service Manual for detailed information.
9.5 SETTING OF DIP SWITCHES AND RSW SWITCHES
9.5.1 Setting of DIP Switches for IPM-PCB
3HP
4HP
5HP
6HP
9.5.2 Setting of DIP Switches for PCB1
Quantity and Position of DIP Switches
DSW1: For Test Run
Factory setting
DSW2
Factory setting
DSW3: Capacity
Factory setting
RASM-3VNE
1 2 3 4 5 6
ON
RASM-4VNE
RASM-5VNE
RASM-6VNE
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
RASM-4NE
RASM-5NE
RASM-6NE
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
ELECTRICAL AND CONTROL SETTINGS
PMML0342B rev.1 - 03/2016
21
