--- 17 ---
(2) Hammer Case Ass'y
[3]
Mounting the hammer
(a) Put the thirty-eight Steel Balls D3.97
[9]
in between the Hammer
[8]
and the Hammer Washer
[10]
.
(b) Mount the Spring
[11]
and the Spring Seat
[12]
to the Hammer
[8]
then insert the Spindle
[17]
into it. Push
the click of the Hammer
[8]
with a hand press and keep it at the position where the Spring
[11]
is
compressed fully. Push the Hammer
[8]
so that the Spindle
[17]
cam top is aligned with the steel ball guide
at the Hammer
[8]
.
(c) Put the two Steel Balls D7.14
[7]
in the steel ball guide. Check that these Steel Balls D7.14
[7]
are in the
cam groove. Then release the hand press.
(3) Mounting direction of the Packing Washer
[25]
Insert the Packing Washer
[25]
into the Inner Cover
[23]
in the proper direction together with the Felt Packing
[24]
when mounting the Armature
[27]
to the Inner Cover
[23]
.
(4) Mounting the cord clip
Fig. 10
Fig. 11
[23]
[25]
[27]
[24]
[48]
[49]
Cord dia. : 8.5 mm max.
Cord dia. : Over 8.5 mm
Содержание WR 22SA
Страница 27: ......
