Hitachi WR 16SE, Инструкция по эксплуатации

Страница: 3 / 100

3
English
IMPACT WRENCH SAFETY
WARNINGS
○ Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
ADDITIONAL SAFETY WARNINGS
1. When using the tool at a hight, make sure that there is
nobody below.
2. Use earplugs if using for a long time use.
3. Switch the reversing switch only after the motor has stoped
when it is necessary to change the direction of the rotation.
4. Use a step up transformer when a long extension cable
is used.
5. Con fi rm the tightening torque by a torque wrench before
use in order to assertain the correct tightening torque to
be used.
6. Assemble the socket securely to the impact wrench with
the socket pin and ring.
7. Con fi rm whether the socket has any cracks in it.
8. Always hold the body and handle of the impact wrench
fi rmly. Otherwise the counterforce produced may result
in inaccurate and even dangerous operation.
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
WR16SE : Impact Wrench
Read all safety warnings and all instructions.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Switching ON
Switching OFF
Clockwise rotation
Counterclockwise rotation
Mode switch
Mode Indicator Lamp
Disconnect mains plug from electrical outlet
Class
II
tool
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains
the accessories listed in the below.
○ Case ...........................................................................1
○ Hook ...........................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening and loosing various kinds of bolt and nut.
SPECIFICATIONS
Voltage (by areas)* (110V, 120V, 230V, 240V)
Power input* 370 W
No load speed / Impact
rate (A,B,C,D mode are
shown in Fig.3 )
A : 1100 / 1300 min
-1
B : 1300 / 1500 min
-1
C : 1400 / 1700 min
-1
D : 1600 / 1900 min
-1
Capacities (size of
bolts)
M12 - M16 (High tension bolt)
M12 - M22 (Ordinary bolt)
Tightening torque** Maximum 360 N·m
Weight*** 2.5 kg
* Be sure to check the nameplate on product as it is
subject to change by areas.
** Tightening the bolt without extension cord at rated voltage.
*** Weight: According to EPTA-Procedure 01/2003
NOTE
Due to HITACHI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
CAUTION
To prevent accidents, make sure to turn the switch o ff
and disconnect the plug from the receptacle.
Action Figure Page
Mounting the socket (1) 1 90
Changing the impact rate 2 90
Changing the rotation direction 3 90
Dismounting the hook (5) 4 90
Selecting accessories ― 91
1. Switch operation (Fig. 3)
The switch (4) in this machine functions as a motor
switch and rotational direction selector switch. When
the switch is set to R indicated on the handle cover, the
motor rotates clockwise to tighten the bolt.
When the switch is set to L, the motor rotates
counterclockwise to loosen the bolt. When the switch is
released, the motor stops.
2. Switching tightening mode (see Fig. 2)
Each press of mode switch (2) will change the impact
rate. Switch (4) (see Fig. 3 ) must be switched OFF when
conducting this operation. Use A or B for light tasks, and
C or D for heavy tasks.
3. The protection function
To protect the tool, the protection function will be
activated, automatically shutting down the unit in the
event of any problems. ( Table 1 )
0000Book̲WR16SE.indb 3 0000Book̲WR16SE.indb 3 2015/02/09 13:39:56 2015/02/09 13:39:56