Hitachi WR 16SA S, Технические данные и руководство по обслуживанию

Страница: 20 / 29

--- 17 ---
(2) Reassembly of the hammer case assembly
Reassembly of the hammer
(a) Put the thirty Steel Balls D3.97 [9] in between the Hammer [8] and the Hammer Washer [10] .
(b) Mount the Spring [11] and the Spring Seat [12] to the Hammer [8] then insert the Spindle [16] into it. Push
the click of the Hammer [8] with a hand press and keep it at the position where the Spring [11] is
compressed fully. At this time, push the Hammer [8] so that the Spindle [16] cam top is aligned with the
steel ball guide at the Hammer [8] .
(c) Put the two Steel Balls D6.35 [7] in the steel ball guide. Check that these Steel Balls D6.35 [7] are in the
cam groove. Then release the hand press.
(3) Mounting direction of the packing washer
Insert the Packing Washer [23] into the Inner Cover [21] in the proper direction together with the Felt Packing
[22] when mounting the Armature [25] to the Inner Cover [21] .
(4) Mounting the cord clip
Fig. 11
Fig. 12
[21]
[23]
[25]
[22]
[50]
[51]
Cord dia. : 8.5 mm max. Cord dia. : Over 8.5 mm