Hitachi WJ-0001S, Руководство пользователя

Страница: 26 / 48

I i

SJ700
series Inverter Keypad description
Key and Indicator Legend
Name Function Name Function
POWER lamp Lights when the control circuit power is on.
ALARM lamp Lights to indicate that the inverter has tripped.
RUN (operation) lamp Lights to indicate that the inverter is operating.
PRG
(program)
lamp Lights when the monitor shows a value set for a function.
This lamp starts blinking to indicate a warning
(when the set value is invalid).
Monitor Displays a frequency, output current, or set value.
Monitor lamps Indicates the type of value and units displayed on the monitor.
"Hz" (frequency), "V" (voltage), "A" (current), "kW"
(electric power), and "%" (percentage)
RUN key
enable LED Lights up when the inverter is ready to respond to the RUN
key.
(When this lamp is on, you can start the inverter with the RUN
key on the digital
operator.)
RUN key Starts the inverter to run the motor. This key is effective only
when the operating device is
the digital operator.
(To use this key, confirm that the operating
device indicator lamp is on.)
STOP/RESET
key Decelerates and stops the motor or resets the
inverter from alarm status.
FUNC
(function) key Makes the inverter enter the monitor, function, or
extended function mode.
STR (storage)
key Stores each set value. (Always press this key
after changing a set value.)
1 (up) or 2
(down) key Switches the inverter operation mode (among monitor,
function, and extended function
modes) or increases or decreases the value set
on the monitor for a function.