English
8
6.
Do not use the battery for a purpose other than
those specified.
7.
If the battery charging fails to complete even when
a specified recharging time has elapsed,
immediately stop further recharging.
8.
Do not put or subject the battery to high
temperatures or high pressure such as into a
microwave oven, dryer, or high pressure container.
9.
Keep away from fire immediately when leakage or
foul odor are detected.
10.
Do not use in a location where strong static
electricity generates.
11.
If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears
abnormal during use, recharging or storage,
immediately remove it from the equipment or
battery charger, and stop use.
CAUTION
1.
If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and contact
a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2.
If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3.
If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return it
to your supplier or vendor.
SPECIFICATIONS
POWER TOOL
STANDARD ACCESSORIES
WH18DFL
1
Battery (BCL1815) ............................. 2
(2LCFK)
2
Charger (UC18YGL2) ............................. 1
3
Plastic case ........................................ 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BCL1815)
Optional accessories are subject to change without notice.
APPLICATIONS
䡬
Driving and removing of machine screws, wood
screws, tapping screws, etc.
No-load speed
0-2500 min
–1
Capacity (Ordinary bolt)
M5 – M12
Tightening torque (Maximum)
130 N·m
Rechargeable battery
BCL1815: Li-ion 18 V (1.5 Ah 5 cells)
Weight
1.5 kg
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see
Figs. 1
and
2
).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in
Fig. 3
.
CAUTION:
䡬
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot
lamp will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals).
(See
Table 1
)
(1) Lamp indication
The indications of the lamp will be as shown in
Table
1
, according to the condition of the charger or the
rechargeable battery.
CHARGER
Model
UC18YGL2
Charging voltage
7.2 – 18 V
Weight
0.6 kg
01Eng_WH18DFL_WE
3/19/09, 20:22
8
