Hitachi WH18DBDL2, Инструкция по эксплуатации

Страница: 16 / 76

Table 5
State of lamp Battery Remaining Power
The battery remaining power is
enough.
The battery remaining power is a half.
The battery remaining power is nearly
empty.
Re - charge the battery soonest
possible.
As the remaining battery indicator shows somewhat
di ff erently depending on ambient temperature and
battery characteristics, read it as a reference.
NOTE
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
8. How to use the LED light
By pressing the light selector switch on the switch
panel, the LED light mode changes as Table 6. It is
indicated by green lamp. (Fig. 14)
To prevent the battery power consumption, turn o ff the
LED light frequently.
ON
ON
OFF
Light
section
switch
Remaining
battery
indicator
lamp
Switch panel
Fig. 14
Table 6
Always - ON
mode
SW
interlocked
mode
Always - OFF
mode
Panel
display
State
Always ON
(turn o ff after
2 minutes)
Light only
SW - ON
Always OFF
(1) Removing the hook.
Remove the screws fi xing the hook with Philips screw
driver. (Fig. 11)
Hook
Screw
Groove
Fig. 11
(2) Replacing the hook and tightening the screws.
Install securely the hook in the groove of power
tool and tighten the screws to fi x the hook fi rmly.
(Fig. 12)
Screw
Hook
Groove
Fig. 12
7. About Remaining Battery Indicator
When pressing the remaining battery indicator switch,
the red indicator lamp lights and the battery remaining
power can be checked. (Fig. 13)
When releasing your fi nger from the remaining
battery indicator switch, the indicator lamp changes
indication of LED light mode. The Table 5 shows the
state of red indicator lamp and the battery remaining
power.
ON
ON
OFF
Remaining
battery
indicator
lamp
Remaining
battery
indicator
switch
Switch panel
Fig. 13
16
English
0000WH18DBDL2.indb 16 0000WH18DBDL2.indb 16 2016/06/15 9:08:39 2016/06/15 9:08:39