manualshive.com logo in svg

Hitachi WH 8D2, Инструкция по эксплуатации и правила безопасности

Поделиться
Скачать
Hitachi WH 8D2 Скачать руководство пользователя страница 18

18

WARNING:

Do not use the electrical cord if damaged.
Have it repaired immediately.

2. Insert the battery to the battery charger.

Insert the battery into the battery charger as shown in Fig. 11.
Make sure it contacts the bottom of the battery charger.

3. Charging

䡬

When the battery is connected to the battery charger, charging will com-
mence and the pilot lamp will light on. (See Table 4)

NOTE: If the pilot lamp blinks, pull out the plug from the receptacle and

check if the battery is properly mounted.

䡬

In approx. one hour, when the battery is fully charged, the pilot lamp will
blink slowly (At 1-second intervals.) (See Table 4)

Table 4

Indications of the pilot lamp

Before charging

Blinks

Lights for 0.5 seconds. Goes out for 0.5
seconds.

While charging

Lights

Lights continuously

Charging complete

Blinks

Lights for 0.5 seconds. Goes out for 0.5
seconds.

Charging impossible Blinks

Lights for 0.1 seconds. Goes out for 0.1
seconds.

7 7 7 7 7 7 7 7 7 7 7 7 7

4. Disconnect battery charger from the receptacle.

CAUTION: Do not pull the plug out of the receptacle by pulling on the cord.

Make sure to grasp the plug when removing from receptacle to
avoid damaging cord.

5. Remove the battery from the battery charger.

Supporting the battery charger with hand, pull out the battery from the battery
charger.

!

!

Содержание WH 8D2





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды