manualshive.com logo in svg

Hitachi WH 8D2, Инструкция по эксплуатации и правила безопасности

Поделиться
Скачать
Hitachi WH 8D2 Скачать руководство пользователя страница 17

17

REMOVAL AND INSTALLATION METHOD OF BATTERY

䡬

How to remove the battery.
Hold the handle tight.
Press the latch located at the front of the
battery and pull out the battery. (Fig. 10)

䡬

How to install the battery.
Position the battery so that the latch faces
toward the switch trigger in the handle
and insert the battery. (Fig. 10)

Handle

Insert

Pull out

Battery

Latch

CHARGING METHOD

NOTE:
Before plugging into the receptacle, make
sure the following points.

䡬

The power source voltage is stated on the
nameplate.

䡬

The cord is not damaged.

WARNING:

Do not charge at voltage higher than

indicated on the nameplate.

If charged at voltage higher than indi-

cated on the nameplate, the charger
will burn up.

1. Insert the plug of battery charger into

the receptacle.

When the plug of battery charger has
been inserted into the receptacle, pilot
lamp will blink slowly. (At 1-second inter-
vals.)

Nameplate

Pilot Lamp

Fig. 11

Fig. 10

!

Содержание WH 8D2





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды