Hitachi VTL4024E, Инструкция по эксплуатации

Страница: 23 / 28

22
ENGLISH
PROBLEM GUIDE
If you are having this kind of trouble:
■
No power (No indicators ON)
■
Recorder fails to respond to user command/
operation
■
No monitor picture
■
“NO VIDEO” appears on the monitor screen dur-
ing recording.
■
Poor picture during monitor viewing (in the
RECORD or STOP mode)
■
Black streaks on picture during 03, A12 or A24
mode playback
■
Recording or playback cannot be done
■
RECORD functions not operate
■
PLAY function not operate
■
TIME/DATE information not displayed on the
MONITOR
■
TIMER recording was not done
■
REWIND or FAST FORWARD does not operate
■
Unable to SELECT/CHANGE program feature
■
The VCR does not operate if an operation button
is pressed
■
Buzzer sounds
Check these things:
■ ■
Check to see if unit is plugged in.
(Power at supply outlet?)
■ ■
Perform MASTER SYSTEM RESET.
See page 20.
■ ■
Carefully check monitor/VCR/camera connectors.
■ ■
This will appear when no video signal is input. If
this happens, check the peripheral equipment
and connection cables.
■ ■
Check monitor/camera adjustments.
■ ■
Adjust the TRACKING control (may need to be
returned to center position if previously adjust-
ed).
The TRACKING control is only active for the 03,
A12 or A24 mode.
■ ■
Replace cassette.
■ ■
Clean video heads.
■ ■
Remove cassette and reinsert.
■ ■
Check the LOCK indicator on the front panel.
If the indicator is lit, press both SET and DOWN
buttons simultaneously to release the security
lock.
■ ■
Check the TAB indicator is lit.
■ ■
See Note on page 10.
■ ■
Be sure there is a cassette in the unit.
■ ■
Press the PROGRAM button.
■ ■
Perform MASTER SYSTEM RESET.
See page 20.
■ ■
TIMER may not have been set properly.
■ ■
Check for SAFETY TAB of cassette.
■ ■
TIME and DATE are not correct.
■ ■
Cassette tape length may have been exceeded.
Multiple ALARMs used up tape.
■ ■
Tape may already be rewound or be at the end
of tape.
■ ■
Check the LOCK indicator on the front panel. If
the indicator is lit, press both SET and DOWN
buttons simultaneously to release the security
lock.
■ ■
Press the EJECT button to remove the cassette,
then restart VCR operations.
■ ■
You have specified the buzzer to sound when
abnormality has occurred. See page 16.