Hitachi VT-FX685A, Руководство по обслуживанию

Страница: 48 / 67

1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
STEP
/LOC.
No. START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[32] [28] TR Gear C B DM2, DM14 (C-6)
[33] [32] TR Gear Spring B DM14
[34] [33] TR Gear A/B B DM1, DM14
[35] [34] FF Arm HI T DM1, DM14
[36] [28] Sensor Gear B DM1, DM15 (C-7)
[37] [28] Idler Assembly B DM1, DM15
[38] [28] BT Arm B DM2, DM15 *(P-5)
[39] [28] Loading Arm S Assembly B DM2, DM15
(+) Refer to Alignment
Sec. Pg. 2-4-9
[40] [39] Loading Arm T Assembly B DM2, DM15
(+) Refer to Alignment
Sec. Pg. 2-4-9
[41] [28] M Brake T Assembly T DM1, DM16 *(P-6)
[42] [28] M Brake S Assembly T DM1, DM16 *(P-7)
[43] [42]
Tension Lever Sub
Assembly
T DM1, DM16
(C-9)
[44] [43] T Lever Holder T DM1, DM16 *(L-5)
[45] [2] M Gear T DM1, DM16 (C-10)
[46] [41] Reel T T DM1, DM16
[47] [44] Reel S T DM1, DM16
[48] [47]
Moving Guide S
Preparation
T DM1, DM17
(S-17), Slide Holder S
[49] [40]
Moving Guide T
Preparation
T DM1, DM17
(S-18), Slide Holder T
[50] [20] TG Post Assembly T DM1, DM17 *(L-3)
[51] [31] Rack Assembly R DM18
(+) Refer to Alignment
Sec. Pg. 2-4-10
[52] [51] F Door Opener A R DM18 *(P-9)
[53] [53] Cleaner Lever Assembly T DM1,DM6
[54] [53] CL Post T DM1,DM6 *(L-6)
↓
➀
↓
➁
↓
➂
↓
➃
↓
➄
↓
➅
↓
➆
2-4-2