24
MANUAL SET UP
CHANNEL 30 [TV]
ADD
- MEMORIZED -
6 Exit the preset mode
Press the RESET/EXIT button on the remote control to return to TV mode.
NOTE:
To confirm that channel(s) has been deleted or added, press the CHANNEL(CH)
or
button.
CHANNEL SET UP AGAIN
Remember:
If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you
DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have
theCH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select
the Box to the channel you wish to view or record.
•
Use the remote control for this procedure.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/
or STOP/
button to point to "CHANNEL SET UP". Then, press the F.FWD/
button.
3) Confirm "AUTO SET UP" is pointed to, then press the F.FWD/
button. After scanning, the tuner stops
at the lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
CHANNEL SET UP
→
AUTO SET UP
MANUAL SET UP
SELECTING THE LANGUAGE
If you want to change the language on the TV screen, follow the steps below:
Note:
This function effects only the language on the screen menu and not the audio source.
•
Use the remote control for this procedure.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/
or STOP/
button to point to "LANGUAGE SELECT". Then, press the
F.FWD/
button.
3) Select "ENGLISH" or "ESPANOL"= Spanish by using the PLAY/
or STOP/
button.
4) Press the RESET/EXIT button to return to TV mode.
NOTE:
If for some reason the menu is in Spanish, press MENU button until the main menu appears, press
PLAY/
button to point to "SELEC.IDIOMA", press the F.FWD/
button, press the PLAY/
button
to point to "ENGLISH", then press the RESET/EXIT button.
