USING THE BUILT-IN CAMERA LIGHT (For VM-2800A/3800A)
54
3.
After use, set the
"LIGHT"
switch to
"OFF"
or set the
"POWER"
switch of the
camcorder to
"OFF"
position.
CAUTION:
During operation and/or after use of the camera light, the front surface and lamp of the camera
light will be very hot. To avoid burns or hair damage, do not touch them with your hand.
When the camera light is on, do not allow water to drop on the light.
When the camera light is on, avoid subjecting the camera light to impacts or sharp vibrations.
Do not allow the cooling vents to become blocked. Also, do not cover the camera light with paper
or other objects, since the air flow will be interrupted, resulting in possible overheating hazard.
Never use the camera light in the vicinity of explosive or highly inflammable materials.
After using the camera light, cool the camera light section sufficiently before
storing the
camcorder in the case.
Replace only with the specified lamp (optional) to reduce the risk of fire.
To replace the lamp of camera light
To remove the front case, press and hold the tab, then remove the front case.
To replace the front case, pass the lamp through the hole of the reflection plate then
attach the upper hooks to the camera light, and then attach the lower hook to the
camera light.
Содержание VM-1800A - Camcorder
Страница 9: ......
