3
Hg
IMPORTANT SAFETY INSTRUCTIONS (continued)
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
•
The LCD Monitor should not be exposed to dripping or splashing and objects filled with liquids, such
•
as vases, should not be placed on the Monitor.
This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
•
The mains plug is used as the disconnect device and shall remain readily operable.
•
If problems occur during installation or operation of the product, before calling for technical support or service
technicians, please read “TROUBLESHOOTING” (
43
~
45
) to determine the symptoms.
If serious problems occur (such as smoke or an abnormal odor from the unit), turn off the main power, unplug the
power cord, and then, contact 800-HITACHI immediately.
Lead/Mercury Notice
This product contains lead and one or more non-replaceable mercury backlights. Do not put in trash.
Recycle or dispose of according to applicable laws. For product recycling and disposal information, contact
your local government agency or visit www.eiae.org (in USA) or www.epsc.ca (in Canada).
FOR MORE
INFORMATION, CALL 800-HITACHI.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
If the Monitor is connected with a Set Top Box or TV Receiver,
•
reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
•
Declaration of Conformity
This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference and (2) This device must accept any interference received,
including interference that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi Home Electronics (America), Inc.
900 Hitachi Way
Chula Vista, CA 91914-3556
Tel. 800-448-2244 (800-HITACHI)
ATTN: Customer Relations
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Hitachi Home Electronics (America), Inc. may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Any cables that are supplied with the system must be replaced with identical cables in order to assure compliance with
FCC rules. Order Hitachi spares as replacement cables.
INDUSTRY CANADA AGENCY REGULATORY INFORMATION
This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
