28
Auto port 80H/84H switch without jumper setting. It auto switch to PORT 80H
for general motherboard and to switch PORT 84H for COMPAQ motherboard
after system power for POST function execution.
Dual POST code display --- User can readout POST at PCB component and
solder side. It is very easy to view the POST code indicator when user plug the
POST card in computer system case.
POST code latch mode selection (JP1)
o
JP1 short -- The function is setup as AUTO mode. (Its function is same as
JET-1024/V4.)
o
JP1 open -- The function is setup as pure POST card mode, it is used for
user didn't read extra PCI device information when user plug the POST
card. (Its function is same as JET-1024/V3.)
