Hitachi TransPortal, Установка, Эксплуатация, Устранение неисправностей

Страница: 13 / 54

TransPortalTM Interlock Monitor
Copyright 2019 SM-1H1.0002 Rev. 2, March 2019 2-3
2.3. Electrical and Mechanical Specifications
The TIM meets all applicable environmental, EMI, and vibration tolerance specifications
for Class C equipment. Table 2-1 and Table 2-2 list the TIM specifications.
Table 2-1. Operating Specifications
PARAMETER VALUE
System Power Source Voltages 8 to 30VDC, 10W
Temperature Range –40 to +70°C
Humidity 0% to 95% non-condensing per AREMA 11.15.1
Vibration Per AREMA 11.15.1
EMI Per AREMA 11.15.1
Isolation and Protection Per AREMA 11.3.3
Table 2-2. Mechanical Specifications
PARAMETER VALUE
Height 2.625 inches
Width 9.5 inches including mounting flanges
Depth, including connectors 7.5 inches
Recommended clearance depth
(including cables)
9.0 inches
Weight 3 lbs.
Mounting Wall or Shelf Flange Mount, Horizontal
2.4. Operating Overview
The MLK continuously monitors various operational parameters and maintains an
internal log of important system event, warning, and error conditions. The TIM looks for
the occurrence of pre-configured SNMP Trap/Inform events within this log. If a
configured Trap/Inform event is detected, the TIM captures data from the controller log
and triggers a message to a host system database. Notifications of the Trap/Inform
event may be delivered by the host to pre-configured recipients by e-mail, fax, text
message, or accessed through direct access to the host system.
The TIM contains an embedded web server. This server allows users to access alarm
and status data, remotely reset the MLK, and perform basic setup of the TIM on the
network using a web browser interface. Optionally, the device may be connected to any
wired IP network for communication with a host system.