Hitachi ST-150NF Скачать руководство пользователя страница 4

Страница: 4 / 92

ST-150NV(NF) USER Guide

Hitachi Terminal Solutions Korea Co., Ltd.

Warning

Installation

1. At installation and relocation of the products, please contact our distributor near

you or our designated dealers. If installation is not perfect, there is a risk of a falling

accident, electric shock, fire and burn injury.

2. At installation and use of the products, keep the space sufficient for opening and

closing the door, cover and operation. If a part of the product touches a human

body, it may cause an accident.

3. In case of installing the product at the following places, you should confirm the

Road Law, Road Traffic Law and Fire Protection Law, etc. If compliance conditions

are not clear, please consult with the authorities concerned.

- The place which may disturb traffic or accident prevention.

- The place adjacent to the fire extinguishing and detecting apparatus.

- The place adjacent to the road signs or traffic signals.

- The place where combustible materials or gas are treated (gas stations, etc.)

Passages and facilities for evacuation Illegal installation may cause an accident.

4. Keep an installation space as described in the instruction manual, and do not

choke up the ventilation inlet. If the ventilation inlet is choked, heat is accumulated

inside and it may cause fire.

5. Depending on the installation place, mounting of an earth leakage breaker is

required by Electricity Enterprises Law. Illegal installation may cause an accident.

1. Do not install the product at the place where water may spill on it. If water enters

into the product, insulation performance degrades and it may cause fire and/or

electric shock.

2. Do not install the product at the place where the floor cannot bear the load of the

product, or at the unstable place with inclination and/or irregularity. It may cause the

accidents of floor caving and sudden move of the product.

3. Installation at the following places should be avoided.

There are safety problems and deterioration of the product may be accelerated,

which leads to a cause of failure.

1m or less from volatile combustible materials or curtains.

1m or less from heating apparatus such as stoves, heaters etc.

The place with direct winds blown from air conditioners, ventilating openings

etc.

Содержание ST-150NF





























































































Результаты поиска

Содержание ST-150NF

Отзывы:

Похожие инструкции для ST-150NF

Бренды по названию

Популярные бренды

Hitachi ST-150NF, Руководство пользователя

Результаты поиска

Содержание ST-150NF

Отзывы:

Похожие инструкции для ST-150NF

Бренды по названию

Популярные бренды