Hitachi SK-HD1300-S3, Руководство по обслуживанию

Страница: 72 / 170

4-13
6
R REGI V
(R channel
compensation of
vertical
registration )
MON out R-G error
±0.1pixel
Position the cursor to the R REGI V, The R-G image
which is produced by subtracting G from R is shown
automatically.
Set the value to make the wave flat on the center of R-G
image (to minimize the wave displayed).
7 B REGI V
(B channel
compensation of
vertical
registration )
MON out B-G error
±0.1pixel
Position the cursor to the B REGI V, The B-G image
which is produced by subtracting G from B is shown
automatically.
Set the value to make the wave flat on the center of B-G
image (to minimize the wave displayed).
8 G REGI V
(Fine adjustment
of G channel
registration)
MON out This setup can be skipped unless the wave does not
become flat despite of the compensation in item 6 and 7.
Position the cursor to the G REGI V and set vertical
phase of G channel.
Setup in item 6 and 7 must be done again.
Color image is displayed on G REGI V setup.
9 OUTPUT
(output
switching for
confirmation of
registration)
MON out This setup can be skipped
Output signal is selectable within RGB, R Only, B Only,
B Only, R-G and B-G.
10 CORRECT
(compensation
of registration
ON/OFF)
MON out Set it to ON.
Make sure the compensation is properly applied to
minimize the registration error.