-19-
MN1-5831 Rev.5
MN1-5831 Rev.5
(2)Adhere the transducer cover closely to the probe pushing the transducer cover nearby pathway of puncture
needle. Then open the release lever of the puncture adapter and insert the puncture needle into the needle
groove.
Puncturing root of puncture needle
Adhere the transducer cover in hatched range closely
to the probe to prevent needle stick into swelled
transducer cover.
Direction of inserting puncture needle
Operate the release lever of the puncture adapter and
open the needle groove.
Insert the puncture needle into the needle groove in
the direction of the arrow.
(To prevent the contact of the puncture needle tip to
the transducer cover.)
Figure 17 Attach the puncture adapter 2
(3) Verify that there is nothing wrong with the transducer cover before puncturing.
Do not use the transducer cover if there is visible damage, such as a tear, and throw away the transducer
cover.
4-6-4. Remove the puncture adapter
In the reverse way of Section 4-2 Attaching of the puncture adapter.
Wash the puncture adapter immediately and disinfect it properly.
Содержание S31KP
Страница 2: ...ii MN1 5831 Rev 5 ...
Страница 6: ...vi MN1 5831 Rev 5 ...
Страница 27: ... 21 MN1 5831 Rev 5 MN1 5831 Rev 5 ...
