Hitachi RAK-18PSC, Руководство пользователя

Страница: 20 / 34

CONTROL AND FUNCTION
9-1
9 CONTROL AND FUNCTION
9.1. WIRELESS REMOTE CONTROL FUNCTION
BUTTONS FUNCTION
MODE Selector
Use this button to select the operationg mode. Every time you press this button, the
mode will change from
cyclically.
FAN SPEED Selector Button
This determines the fan speed. Every time you press this button, the airflow rate will
change from
(This button
allows selection of optimal or preferred fan speed for each operation mode).
START/STOP button
Press this button to start operation. Press it again to stop operation.
ECO button
Use this button to set the ECO mode.
POWERFUL button
Use this button to set the POWERFUL mode.
SILENT button
Use this button to set the SILENT mode.
INFO button
1) Press this button to display temperature for 10 seconds.
2) Press this button to check monthly power consumption.
3) Press this button to recieve the current calendar and clock.
ECO SLEEP TIMER button
Use this button to set the ECO sleep timer.
AUTO SWING (Vertical) button
Controls the angle of the horizontal air deflector.
WIND MODE button
Controls the angle of the vertical air deflector, direct airflow and indirect airflow.
LEAVE HOME button
Prevent the room temperature from falling too much by setting temperature 10
°
C
automatically when no on is at home.
WEEKLY TIMER buttons
ON/OFF TIMER button
The device will turn on (off) and off (on) at the designated time.
TIME button
Press the button to set starting time of the program
OK button
Press the button to save the program. The button shall be pressed everytime after
finishing a program setting.
DELETE button
1) Press the button to delete the selected program.
2) Press the button for about 10 seconds by directing the remote controller
towards the indoor unit while Mode A or B display blinks, programs for Mode A
or B will be deleted both from the indoor unit and the remote controller after the
beep sound from the indoor unit.
DAY button
Select the desired day of the week.
PROGRAM NO. button
Press this button to select a program number.
CANCEL
1) Press the button to cancel the current setting process on the screen.
2) Press the button by directing the remote controller towards the indoor unit, hen
weekly timer setting will be canceled from indoor unit after the beep sound from
the indoor unit. The program setting remains in the remote controller.
SEND button
Press the button for about 3 seconds by directing the remote controller towards the
indoor unit after finishing the program setting. Timer lamp on the indoor unit will blink
rapidly and after the beep soung from indoor unit, TIMER lamp will light up.
CLOCK button
Press the button to set calendar and clock.
WEEKLY TIMER MODE button
1) Select Mode A or Mode B. 2 modes can be set and stored as a weekly timer.
2) By pressing the button longer than 3 seconds, program setting screen will
appear.
RAR-5W2
RAR-5W2