Hitachi RAI-50PPD Скачать руководство пользователя страница 34

Страница: 34 / 34

12.6 TEST RUN

After completing the installation of the air panel, the test run
should be performed.

Perform the checking work for the louvre during the test run.

Do not move the louvre by hand. If moved, the auto-swing
mechanism will be damaged.

12.7 ADJUSTING LOUVRES

N O T E

•

The adequate

conditions (air conditioner’s installation position, room structure or

furniture layout, etc.) If the cooling or the heating is not well, adjust

•

If the cooling operation is performed under the condition with over

80% humidity, dew condensation may occur at the air panel or the

louvre.

C A U T I O N

Do not move the louvre by hand. If moved, the louvre mechanism will be

damaged. In addition, do not apply an excessive force to the air outlet

part to prevent the breakage.

Louver

Louvre

INSTALLATION OF OPTIONAL AIR PANEL: P-AP56NAMS

PMML0477 rev.0 - 07/2017

OPTIONAL PART

13.1

OPTIONAL PART CONNECTION FOR INDOOR UNIT

To connect to H-LINK, a separately purchased RAC Adapter is required.

To connect to Dry Contact, a separately purchased Dry Contact Connection

Cord is required.

To connect Wired Remote Control, a separately purchased Wired Remote

Control is required.

To connect to WiFi, a separately purchased WiFi Adaptor is required.

●

To install the wiring, remove the metal cover of electrical box.

As for Dry Contact, connect the connection cord to CN25.

As for WiFi Adaptor or RAC Adaptor, connect the connection cord to CN1101.

As for Wired Remote Control, connect the connection cord to CN1102.

●

The connection cords and power cable are to be arranged and tied up as per

the diagram as shown above.

●

Please refer to the respective user manual of the Dry Contact, WiFi Adaptor, RAC

Adaptor and Wired Remote Controller for further details.

●

Please refer to user manual for instructions on removal and installation of the

electrical box.

●

Please be careful not to damage lead wires by edge of metal plate when connecting

the optional parts.

●

For ordering all optional parts, please refer to the catalogue for part number.

CN1101

WIRED REMOCON CORD

DRY CONTACT CORD

CN25

CN11A

WIRELESS REMOTE

CONTROLLER CORD

CN1101

WIFI ADAPTER/

RAC ADAPTOR CORD

Содержание RAI-50PPD



































Результаты поиска

Содержание RAI-50PPD

Отзывы:

Похожие инструкции для RAI-50PPD

Бренды по названию

Популярные бренды

Hitachi RAI-50PPD, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RAI-50PPD

Отзывы:

Похожие инструкции для RAI-50PPD

Бренды по названию

Популярные бренды