background image

– 3 –

ENGLISH

PRECAUTIONS DURING OPERATION

Do not attempt to operate the unit with wet hands, this could cause fatal
accident.

When operating the unit with burning equipments, regularly ventilate the
room to avoid oxygen insufficiency.

Do not direct the cool air coming out from the air-conditioner panel to face
household heating apparatus as this may affect the working of apparatus
such as the electric kettle, oven etc.

Do not place plants directly under the air flow as it is bad for the plants.

Please ensure that outdoor mounting frame is always stable, firm and
without defect. If not, the outdoor unit may collapse and cause danger.

Do not splash or direct water to the body of the unit when cleaning it as this
may cause short circuit.

When operating the unit with the door and windows opened, (the room humidity is always above
80%) and with the air deflector facing down or moving automatically for a long period of time,
water will condense on the air deflector and drips down occasionally. This will wet your furniture.
Therefore, do not operate under such condition for a long time.

If the amount of heat in the room is above the cooling or heating capability of the unit (for
example: more people entering the room, using heating equipments and etc.), the preset room
temperature cannot be achieved.

Do not climb on the outdoor unit or put objects on it.

Please switch off the unit and turn off the circuit breaker during cleaning, the
high-speed fan inside the unit may cause danger.

Turn off the circuit breaker if the unit is not to be operated for a long period.

C
A
U

T

I

O

N

!

The product shall be operated under the manufacturer specification and
not for any other intended use.

Do not put water container (like vase) on the indoor unit to avoid water
dripping into the unit. Dripping water will damage the insulator inside the unit
and causes short-circuit.

Do not use any aerosol or hair sprays near the indoor unit. This chemical
can adhere on heat exchanger fin and blocked the evaporation water flow
to drain pan. The water will drop on tangential fan and cause water splashing
out from indoor unit.

Содержание RAC-18CH5



























Отзывы: