~ 10 ~
To operate the remote controller, remit the signal facing towards the infrared
receiving window.
When pressing a button, the remitting indicator light on the remote controller
will flash and the buzzer on the unit will send out a “beep” sound, meaning a
signal has been received.
Precautions
If the indoor lighting apparatus is turned on with an electronic device, then the
remitting distance of the remote controller will be shortened.
The remitting distance of the remote controller will be 7m right from the infrared
receiving window. The effective remitting distance will be shortened depending on
the deflection angle.
Use a soft and dry cloth to clean the remote controller. Never clean it directly by
washing with water.
If the liquefied crystal in the LCD leaks, never touch or swallow it. In case of contact
with hands or skin by accident, wash with water thoroughly.
The service life of a battery under normal usage is one year.
When the content of the display flashes, or the screen is not clear or no screen, or the
remitting distance of the remote controller is shortened, indicating that the battery power is
insufficient, replace the batteries.
Battery replacing guidelines
Precautions
If the battery is not used properly, there is a risk of liquid leakage or bursting.
Do not mix new and used batteries.
Do not mix batteries of different types.
If the remote controller will not be used for a long period of time, remove the batteries.
You can attach the remote controller on the wall, pillar
or the table using the remote controller holder.
Attach the remote controller holder with steel nails at a
proper location. (Do not attach it at places subject to
direct sunlight or high temperature heat sources.)
Insert the remote control in the remote controller holder
(in the arrow direction as shown in the diagram).
HOW TO USE THE REMOTE CONTROLLER
HOW TO CHANGE THE BATTERIES IN THE REMOTE CONTROLLER
1
. Pull the cover according to the arrow direction, and
take out batteries.
2. Install new batteries with correct directions to the
⊕
polarities shown on the case. (Battery size : AAA 1.5V)
Cover
Push and pull to
the direction of
arrow mark
HOW TO INSTALL THE REMOTE CONTROLLER
機
種
高（
mm
）
寬（
mm
）
深（
mm
）
R AV- 2 0 A L
8 6 0
4 0 0
2 9 8
R AV- 2 0 B P
8 6 0
4 0 0
2 9 8
R AV- 2 5 A S J
8 6 0
4 0 0
2 9 8
R AV- 2 5 S W
8 6 0
4 0 0
2 9 8
Remove the remote controller
by gently pulling the
top of the remote controller
towards you
.
remote controller in the hook
of the holder
.
Remote
controller holder
Remote
controller
Engage the bottom of the
