63
Vacuum Compartment
Once a month
Pull out the Vacuum Case.
For how to remove,
Pg.66
Be sure to remove foods contained in the Vacuum Case.
Remove the Platinum Catalyst Case.
The platinum catalyst case should be wiped clean with use of
a firmly squeezed wet-dishcloth.
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
※
Do not use the detergents, etc.
Attach the Vacuum Case.
For how to attach,
Pg.66
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
Attach the Platinum Catalyst Case at
the Vacuum Case.
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer’ s upper right and
remove it by hand
carefully.
When the Vacuum Compartment Gasket is dirt
Rinse dirty portion in water using
a soft sponge, etc.
※
Do not use the detergents, etc.
Wipe off excess moisture with a
dry cloth and dry it out naturally.
Wipe off dirt in the vacuum
compartment gasket
mounting groove.
Attach the vacuum compartment gasket.
Align the gasket tab of the vacuum compartment with the
notching in the mounting groove and align the hollows in
the gasket between the protrusions (six locations) of the
case to firmly attach.
1
1
2
3
5
4
2
3
4
5
Tab
If detergents and others except lukewarm water are used
to clean the vacuum compartment gasket, the vacuum
compartment gasket may be damaged, deformed or change
in color, which may cause the vacuum state unable to keep
well.
Request
Vacuum Container
Vacuum Compartment Gasket seat
Aluminum Tray
Pull out it straight up
Vacuum compartment
gasket
Groove for attaching the vacuum compartment gasket.
Locations of the projections of the case
Hollows in the gasket
Projection of the case
Notching of the mounting groove
Tab
Fin
Do not wash in water.
Request
M
AIN
TE
NA
NC
E
BB0055761S_R-XG480KH_A.indd 63
19.9.30 2:28:09 PM