Hitachi R-MX800GVGV0, Инструкция по эксплуатации

Страница: 9 / 64

1
t
Other Functions
(Refrigeration compartment/ Freezer Compartment)
Touch “ Temp. Control” for 5 seconds
until 1 “Peep” sound is heard.
Each time you touch the button, the corresponding indicator lamp changes in order shown below (9 steps).
( Lighting Blinking Turned off )
Touch “Select” and “Temp control” to make as adjustment.
Pi ! Pi ! Pi ! Pi ! Pi ! Pi ! Pi ! Pi ! Pi Pi!
Indication
lamp
Setting
Cold Coldest Normal
Sound
2
9
● During "Quick Freezing", priority cooling of the freezer compartment will be done, Thus,try to avoid unnecessary opening
and closing the doors not to have a temperature rise of the refrigerator compartment.
●
After "Quick Freezing" is automatically finished, if the button is pres sed again ,the lamp will turn on, however, the next
"Quick Freezing" operation will not start. After 60 minutes, the operation will be started again.
● During defrost periods, even if "Quick Freezing" lamp is on, no ope ration will be made. After finishing the defrost operation,
"Quick Freezing" will be automatically started.
● Normal
y
, Lamp is off when no operation approximately 10sec. after the end of operation indicator LED become unlit.
When you wish to store frozen food at a lower temperature than u sual ,use this button.
2. Touch "Quick Freezing”
button, and start
operation of
"Quick Freezing".
3. Touch again "Quick Freezing,
and stop the operation.
“Quick Freezing” corner
is located on the center shelf
infront of freezer.
Pi!
Pipi!
Pipi!
Lamp lights off.
NOTICE
1. Put food on the Quick Freezing corner.
"Quick Freezing" will be finished
automatically in approximately
2 hours.
Lamp lights on.
To set the fine adjustment of the temperature
“Quick Freezing”
Coldest Coldest
Cold Cold
Coldest Coldest
Cold Cold
Coldest Coldest
Cold Cold
Coldest Coldest
Cold Cold
Coldest
Cold
Setting
Lamp lights off.
To cancel the fine adjustment of the temperature
Touch “ Temp. Control ” button for 5 seconds until “PiPi!” sound is heard and you can set temperature by normal step (5 steps)
● This function is subjected to change according model type.
Touch “ Temp. Control ”
for 5 seconds until 1 “PiPi!”
sound is heard.
● Factory setting, the adjustment temperatrure by normal step ( 5 steps).
PiPi!
NOTICE