Hitachi R-KW570RH, Инструкция по эксплуатации

Страница: 45 / 76

45
3
4
5
Pg.61 ‒
63
Cleaning the inside of the refrigerator.
● Wipe with a soft, damp cloth, then finish with a dry cloth.
● Rinse the Water Supply Tank and water filter.
※ Do not wipe off the lubricant applied to the slide door rails or the contact surface of the rails.
※ At the beginning, the refrigerator may smell of plastic.
If you are concerned, ensure that the room is well ventilated.
(Smell will gradually disappear)
(after cooling the refrigerator compartment, the other storage compartments are cooled
You may plug in the power cord immediately after installing the refrigerator.
Do not share the wall outlet with any other appliances. (Alternating current 220 V, rated 10 A or more)
Plug the power cord.
●
Check that the power plug or the cord is not wedged between the back of the refrigerator and the wall in order to prevent the cord from getting hot.
Pg.63
Cooling inside the refrigerator begins
It may take more than 4 hours to cool
well the inside of the refrigerator, depending on conditions such as the
ambient temperature or storage state of foods.
It may take 24 hours or more in summer, etc.
Do not put ice cream, uncooled foods or perishable foods in the refrigerator until the inside has cooled well.
Perform
"Ice Maker Cleaning"
when using the automatic ice making function for the first time.
Ice making will start automatically after the inside of the refrigerator has cooled well.
(When using for the first time,
it may take 24 hours or more to make ice
.)
When the temperature inside the refrigerator is low, cooling may not start for about 10 minutes after plugging in the power plug.
(ice compartment, freezer compartment, selectable compartments))
Do not peel off the sticker on the back or remove the plastic parts on the sides of the refrigerator at the bottom.
If you attach a magnet or suction cup to the front of the main body or to a door, it may leave a mark.
If you attach paper to the door surface in a high ambient temperature environment, condensation may
form on the door surface or the paper may absorb moisture.
Rust proofing of the piping may be required.
When installing the refrigerator near a hot spring area, industrial area, or near sewer pipes, etc., the piping may corrode due to the effect of sulfide gas.
Contact your dealer. The warranty does not cover failures due to sulfide gas damage, such as blackening of the piping.
After inserting the power plug into a wall outlet, you will hear noise from the refrigerator. It is preparing for operation.
You may also hear a louder noise from the compressor or fan until the inside is cooled enough.
Note
Plastic parts (left and right)
Sticker
●
●
●
●
●
BEFORE USE
At purchased, Upper Selectable Compartment is set as “Freezer”, and Lower Selectable Compartment
is set as “Veg”.
Switch to your preferred setting for use.
Check the setting of the Upper Selectable Compartment and Lower Selectable Compartment.
Pg.55