
61
How to attach the slide door
(Ice Compartment/Upper Freezer/Lower Freezer/Vegetable Compartment)
Ice Compartment/Upper Freezer
Lower Freezer/Vegetable Compartment
Frame
Frame
Ice Case
(Ice Compartment)
・
Upper Freezer case
(Upper Freezer)
Open the door and lift up the case toward you.
To mount the case, insert the right and left projections of the
case into the rectangular holes.
Projection
Rectangular hole
Frame
Upper Case, Partition and Lower Case
(Vegetable Compartment)
●
When opening the door, do not place your foot near the door. Doing so may
get your foot caught between the door and the floor.
●
Be careful. Water may drip from the backside of the lower case.
●
Be sure to remove the partition before removing the lower case.
Caution
●
Improper installation of the Upper Case and the Partition
may damage parts, including cases.
Once the Upper Case is installed, slide it in the front-rear
direction to confirm that it is mounted properly.
Request
Incorrect placement may cause abnormal noises and improper door closure when opening and closing.
When attaching the partition, align the letter [R] on the front lower right side, and insert it firmly into
the lower case until the end.
Pull the compartment out all the way. Then,
holding 2 both sides of the compartment,
lift it slightly and then slowly pull it out so
that the front of the compartment rests on
the floor.
Lift up the
Upper Case.
Lift up the
Lower Case.
Remove the partition.
●
Hold both sides of the
partition and lift it straight up.
Lower Case
Pin (right and left)
Square hole in the frame
Upper Case
Partition
Lower Case
Front side
Back side
HOW TO REMOVE/ATTACH PARTS
Slide case and lower freezer case
(Lower Freezer)
When installing it, insert the pins on the left/right of the Lower freezer case into the square holes on the frame to install it.
Moreover, hitch the fork on the left/right of the Slide case to the outside of the Lower freezer case.
Slimline slide case
Draw the door fully, and draw the Slide case
respectively.
Slide case
Pin (right and left)
Fork (right and left)
Rectangle
hole in the
frame
Frame
Lower freezer case
Lift up the Lower
freezer case.
Seal
●
Do not peel off the adhesive
seal.
Caution
●
Do not remove the Slimline slide case.
Caution
BB0055761Y_R-G420KH_A.indd 61
19/11/08 9:08