60
●
Before removing parts, take out all the foods on the parts.
●
Do not remove parts except the ones listed here.
Please contact with a Hitachi customer service centre for cleaning such parts after removing them.
●
Do not remove the platinum catalysts in the Vegetable Compartments. Do not wash them with water.
HOW TO REMOVE/ATTACH PARTS
Caution
Height adjustable upper and middle shelf
When installing the shelf, slide it until it reaches to the interior wall, then slightly lift up
the back of the shelf and push it in.
(hitch the forks of the shelf to the parts on the back of the shelf)
Slightly lift up the back
of the shelf and draw it.
Raise the shelf,
as shown in the
drawing.
Rotate and
remove it.
Forks of the shelf (Right / Left)
Check if it is fixed properly by taking it in and out a few times.
Request
Door pocket
Fixed shelf
Vacuum Case
Height adjustable lower shelf
Pull out the Vacuum Case by slightly
lifting up and moving up and down.
Insert the Vacuum Case so that both
right and left convex ribs on the case
can slide under the guide rail of the
Vacuum Container.
Lastly, hold down the handle to lock.
How to remove
How to attach
Guide rail
Vacuum Case
Vacuum Container
Convex rib
Lift up the door pocket while tapping the left/right of its
bottom surface, and remove it.
(It is fixed a little tightly.)
Caution
Insert the door pocket fully to the end when installing it.
If it drops, it may break and cause bruise or injury.
Upper
shelf
Middle
shelf
Draw the shelf, and pull off the 2 pins on the
lower right and remove it.
Slightly lift up and pull out.
Forks
H
G
F
B
A
D
C
E
Remove the middle shelf before removing the upper shelf.
Request
Tap
Tap
BB0055761Y_R-G420KH_A.indd 60
19/11/08 9:08