Hitachi R 18DA, Инструкция по эксплуатации

Страница: 13 / 48

English
13
EMPTYING THE DUST CASE
CAUTION
○ To prevent accidents, make sure the
power is switched o ff and remove the
rechargeable battery from the appliance.
○ Do not subject the dust case to strong impacts
as this may cause deformation or damage.
○ Empty the dust case frequently and keep
the appliance, fi lter, etc. clean. Failure to
do so may reduce vacuuming e ffi ciency or
cause malfunction of the motor or odor.
1. Turn the dust case and pull it from the housing.
( Fig. 17 )
NOTE
Point the intake port downward as dust can spill
when removing the dust case.
2. Dispose the dust in the dust case.
3. If the suction does not recover after disposing
the dust, clean the pre fi lter as well as the fi lter.
4. Attach the fi lter, pre fi lter and dust case to the housing.
E ff ectively removing dust (Fig. 18)
The appliance has a built-in mechanism for
scraping o ff dust attached to the pre fi lter
when removing the dust case.
To even more e ff ectively scrape o ff the dust,
repeatedly turn the dust case back and forth
(2 to 3 times or more).
MAINTENANCE AND INSPECTION
1. Cleaning the fi lter
CAUTION
○ Do not wash the fi lter in a washing machine.
○ Do not wash the fi lter in hot water or dry it by fi re.
If the vacuuming e ffi ciency is poor even when the dust case has been emptied, remove the
fi lter and wash it in cold or warm water. (The water should not be hot to the touch.)
After washing, dry out of direct sunlight.
Fig. 17
Point the intake port downward
Remove
Housing
Dust Case
Dust Case
Dust
Fig. 18
Turn 2 to 3 times
Pre Filter
Dust
Dust Case
Dust Removal Blades (3)
(Fixed to the inside of the
dust case)
000Book̲R18DSAL̲ChS.indb 13 000Book̲R18DSAL̲ChS.indb 13 2017/04/28 9:41:32 2017/04/28 9:41:32