English
11
(4) Install the
fi
lter (
Fig. 9
)
Fit
the
fi
lter over the
fi
lter holder.
(5) Install the pre-
fi
lter (
Fig. 10
)
When installing the pre
fi
lter, press the
housing on with the projections in a horizontal
position. Then, turn the pre-
fi
lter until the
projections are
fi
xed in the grooves of the
housing.
(6) Install the dust case (
Fig. 11
)
Place the dust case over the housing, making
sure that the protruding marks on both are
aligned. Then, turn the dust case clockwise for
approximately 120 degrees.
HOW TO USE
WARNING
To prevent accidents when installing or removing the rechargeable battery, make
sure that the appliance is switched o
ff
.
CAUTION
○
Make sure that the rechargeable battery is
properly installed. If not properly installed, the
battery may fall out, causing injury.
○
Make sure the
fi
lter and pre
fi
lter is installed
when operating the appliance. Failure to do so
may result in injury or malfunction.
1. Verify
the
fi
lter (
Fig. 12
)
Check to make sure the
fi
lter is installed.
* The dust case can also
be installed with the
nozzle facing upwards.
Fig. 11
Protruding
Marks
1
Align the
protruding
marks
Dust Case
Housing
2
Turn clockwise for
approximately 120
degrees
Dust Case
Dust Case
Pre Filter
Projections
Fig. 10
1
Push in
2
Turn to
secure
Hold here
Housing
Grooves
Fig. 9
Filter
Filter Holder
Fig. 12
Pre Filter
Dust Case
Filter
000Book̲R18DSAL̲ChS.indb 11
000Book̲R18DSAL̲ChS.indb 11
2017/04/28 9:41:31
2017/04/28 9:41:31
