CD / DVD / VCD / MP3-CD
Adjusting the TV system
Before viewing the Video Disc DVD or VCD, ensure that the set is switched to corresponding
PAL or NTSC system of your TV set. If your TV set is a Multi-System TV, we suggest that it is set at AUTO mode.
Loading a disc
1. Press OPEN, the door lid will open.
2. Load a disc with the label side facing up.
3. Close the door lid, the system will play the disc from track 1 automatically.
Playing a DVD disc
1. Press
to start playback in disc stop mode.
2. To interrupt playback, press
again during disc playback.
3. Skip forward, or skip backward a chapter by pressing
/
, each press will jump to the beginning of the next
or previous chapter.
4. Press
/
to search a passage fast forward or reverse.
5. During fast forward or backward, press
the disc will resume normal playback.
6. In playback mode, press GOTO and then enter the desired TITLE or CHAPTER number by number key, finally press
OK key to confirm your selection.
7. Pressing the SLOW key in playback mode will enable you to watch your desired disc in slow motion. Press the
SLOW key repeatedly for different speeds.
8. Press STOP once, the player will go to Resume Stop mode. In this condition press the
key and the film will
resume playback from the point where it was stopped. If STOP is pressed again in Resume mode, the player will
go to stop mode. When
is pressed the disc will start from the beginning of the disc.
Playing a VCD disc
1. Press
to start playback in disc stop mode.
2. To interrupt playback, press
again during disc playback.
3. Skip forward, or skip backward a chapter by pressing
/
, each press will jump to the beginning of the next or
previous chapter.
4. During fast forward or backward, press
the disc will resume normal playback.
5. Pressing the SLOW key in playback mode will enable you to watch your desired disc in slow motion. Press the
SLOW key repeatedly for different speeds. “
6. Press STOP key to stop playback.
Notes :
- In “ PBC ON “ mode, you could use number keys to select the desired chapter for playback directly.
- To toggle “ PBC ON “ or “ PBC OFF “ , press TITLE button on the remote control.
Playing a CD, CD-G disc
1. Press
to start playback in disc stop mode.
2. To interrupt playback, press
again during disc playback.
3. To stop playback, press STOP.
Selecting a desired track / passage
- Skip forward, or Skip Backward a track by pressing
/
, each press will jump to the beginning of the next or
previous chapter. Or use number key, and press OK key to select a desired track directly.
- Press
/
to search a passage fast Forward or Reverse. ( not support for CD-G )
- During fast forward or backward, press
the disc will resume normal playback.
Notes :
- If a CD-G disc is played, some pictures from the disc will be displayed on the TV as a Slide Show for watching.
Playing an MP3
- Load an MP-3 CD format music disc.
- The system will play the MP-3 disc from track 1 of Album 1 automatically.
- On the screen, the disc menu is displayed.
Selecting a desired album and a desired track
1. In stop mode, press arrow key UP or DOWN to set desired Album and press OK key to confirm the selection and
start to playback.
2. Press
/
repeatedly to select a desired track from the current Album.
3. Press
/
to search a passage fast forward or reverse.
4. To stop playback, press STOP .
For JPEG Picture CD playback ( up to 5Mb pixels )
After a JPEG picture file is detected by the system, press arrow key UP / DOWN to set desired Album and press OK
key to confirm the selection and start to playback.
1. Press
/
repeatedly to select a desired track from the current Album.
2. Press arrow key UP ,DOWN
, LEFT
or RIGHT
to rotate the picture from the current position.
Notes :
- To ensure good system performance, wait until the disc tray completely reads the disc before proceeding.
- For MP-3 CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
GB-12
Hitachi Eng manual-for vde.p65
7/22/04, 9:55 AM
13
