Hitachi PC-ARFG1-A Скачать руководство пользователя страница 12

Страница: 12 / 56

3. Operation Method

A11766820A

3.7 Icon Description

The status of the remote controller is displayed on the operation screen.
NOTES:

•

It may not be displayed depending on the type of outdoor unit or indoor unit you are using.

•

If there are multiple status, the high priority icon is displayed first.

No.

Icon

Description

A schedule timer is set.

Set the current time. Schedule timer operation is not possible.

The off timer is set.

The operation lock is set.

Displayed when using the central controller. Remote control operation is

restricted.

It is time to frostWash the heat exchanger.

It is time to clean the air filter.

A/C

Air-conditioning operation is performed.

Vent.

THEX Vent.

Auto Vent.

Norm. Vent.

Ventilation, automatic ventilation, total heat ventilation, and normal ventilation

are operating.

Displays the room temperature. (*1)

SAG

Elevating grille is not stored correctly.

Temporary

Emergency operation is in progress.

Setback

When setback operation is enabled and the card key is removed (when no one is

present). (*2)

Purging

In night purge progress.

Setback aborted

Setback is aborted.

24 hour ventilation

24 hour ventilation is in progress.

Humidifier is run

The humidifier is in operation.

Motion Sensor ON

Indicates capacity savings by motion sensor control during operation or stop.

Radiant Sensor

In order to efficiently heat the room when the radiant temperature is low, the

wind direction and air volume are automatically controlled.

Cold draft restrained

In order to prevent indoor temperature from being too low.

Noise reduction

The operation noise reduction control of the outdoor unit is set.

FrostWash is complete

Indicates the frostWash is performed.

IU temp. over range

FrostWash stopped

If the indoor temperature is out of the range of 59°F(15°C) to 86°F(30°C), no

frostWash is performed and the cancellation is displayed.

OU temp. over range

FrostWash stopped

If the outdoor temperature is out of the range of 34°F(1°C) to 110°F(43°C), no

frostWash is performed and the cancellation is displayed.

Sav

Sav: Low

Sav: Med

Sav: High

Either the outdoor capacity control, indoor rotation control, or intermittent

operation control is set.

Ext.Sav

Outdoor capacity control is set on the central controller or outdoor unit.

It does not light when the indoor rotation control or intermittent operation

control of the remote controller is set.

Main

This is the main remote controller setting.

Use the main remote controller to set the main power savings setting.

In the case of a single unit, the main does not light up.

Sub

Sub remote controller is set. Except for some power savings functions, the sub

remote controller cannot be set to save power.

Sub

There is no main remote controller.

Controls related to power savings and operation noise reduction may not

operate normally.

Содержание PC-ARFG1-A

























































Результаты поиска

Содержание PC-ARFG1-A

Отзывы:

Похожие инструкции для PC-ARFG1-A

Бренды по названию

Популярные бренды

Hitachi PC-ARFG1-A, Руководство по эксплуатации

Результаты поиска

Содержание PC-ARFG1-A

Отзывы:

Похожие инструкции для PC-ARFG1-A

Бренды по названию

Популярные бренды