41
How to maintain the water inlet
供水口的保養
The contamination accumulated at the water inlet will worsen the supply effect.
供水口積有髒物會影響供水效果。
Turn off the tap, and remove the water supply hose.
(Refer to page 13 for proper disassembly)
關閉水龍頭，卸下供水管。
（拆卸方法
13
）
1
Clean up the contamination accumulated at the fi ltering
net of water inlet.
清除供水口濾網處積留的污物。
•
If it's hard to clean up the contamination, disassemble the
fi ltering net for east cleanout.
若污物不易清除時，可將濾網拆下以便清洗。
2
Attention
ᘜา
•
The fi ltering net of water supply opening shall be recovered to the original shape after cleanout, so
as to avoid the failure of water supply valve.
供水口濾網清洗後，請務必恢復原狀，以免引起供水閥的故障。
Water inlet
ͧᖛם
Please use the soft cloth to wipe and clean the dirt on the washing machine body and the control panel.
請用軟布將機體和控制面板上的污垢擦拭乾淨。
Attention
ᘜา
•
Please don't use gasoline, thinner, detergent, alkali or weak-alkali detergent and wax to wipe the washing ma-
chine body, and please don't use brusher to wipe the body either.
請勿用汽油、稀釋劑、清潔劑、鹼性或弱鹼性洗衣粉以及蠟等物質擦拭機體，也請勿用刷子來擦洗機身。
•
When using the chemical duster cloth, please refer to its user manual.
使用化學抹布時請遵照其使用說明。
•
Remove any detergent touching the lid or other plastic components, otherwise it will damage the washing ma-
chine body after long remaining.
清潔劑沾至機蓋等塑料部件時，應立即擦除，否則長時間會損傷機身。
Warning
警告
During the course of maintenance and repair, don't
spray water directly to any part of the washing ma-
chine body.
進行保養時，請勿直接將水淋灑在洗衣機的各個部位
。
•
To avoid short circuit or electric shock.
以免造成短路或觸電。
Maintenance to the main unit
機體的保養
