background image

17

English

(1)  Charge indicator lamp indication

 

The indications of the charge indicator lamp will be as shown in 

Table 1

, according to the condition of the charger or the 

rechargeable battery.

Table 1

Indications of the charge indicator lamp

Charge 

indicator 

lamp 

(RED / 

BLUE / 

GREEN / 

PURPLE)

Before

charging

Blinks

(RED)

Lights for 0.5 seconds. Does not light for 

0.5 seconds. (o

  for 0.5 seconds)

Plugged into power source

While

charging

Blinks

(BLUE)

Lights for 0.5 seconds. Does not light for 1 

second. (o

  for 1 second)

Battery capacity at less than 50%

Blinks

(BLUE)

Lights for 1 second. Does not light

for 0.5 seconds. (o

  for 0.5 seconds)

Battery capacity at less than 80%

Lights

(BLUE)

Lights continuously

Battery capacity at more than 80%

Charging 

complete

Lights

(GREEN)

Lights continuously

(Continuous buzzer sound: about 

6 seconds)

Overheat

standby

Blinks

(RED)

Lights for 0.3 seconds. Does not light for 

0.3 seconds. (o

  for 0.3 seconds)

Battery overheated. Unable to 

charge. (Charging will commence 

when battery cools)

Charging 

impossible

Flickers

(PURPLE)

Lights for 0.1 seconds. Does not light for 

0.1 seconds. (o

  for 0.1 seconds)

(Intermittent buzzer sound: about 2 seconds)

Malfunction in the battery or the 

charger

(2)  Regarding the temperatures and charging time of the rechargeable battery

 

The temperatures and charging time will become as shown in 

Table 2

.

Table 2

Charger

Battery

UC18YSL3

Charging voltage

V

14.4

18

Type of battery

Li-ion

Temperatures at which the battery can be 

recharged

-10

o

C – 50

o

C

Charging time for battery capacity, approx.

(At 20

o

C)

1.3 Ah

1.5 Ah

2.0 Ah

2.5 Ah

3.0 Ah

4.0 Ah

5.0 Ah

6.0 Ah

min.

min.

min.

min.

min.

min.

min.

min.

15 (4 cells)

15 (4 cells)

20 (4 cells)

25 (4 cells)

20 (8 cells) / 30    * BSL1430C

26 (8 cells)

32 (8 cells)

38 (8 cells)

15 (5 cells)

15 (5 cells)

20 (5 cells)

25 (5 cells)

20 (10 cells) / 30    * BSL1830C

26 (10 cells)

32 (10 cells)

38 (10 cells)

NOTE

 

The recharging time may vary according to the ambient 

temperature and power source voltage.

4. Disconnect the charger’s power cord from the 

receptacle.

5.  Hold the charger 

fi

 rmly and pull out the battery.

NOTE

 

Be sure to pull out the battery from the charger after use, 

and then keep it.

Regarding electric discharge in case of new batteries, 

etc.

 

As the internal chemical substance of new batteries and 

batteries that have not been used for an extended period 

is not activated, the electric discharge might be low when 

using them the 

fi

 rst and second time. This is a temporary 

phenomenon, and normal time required for recharging 

will be restored by recharging the batteries 2 – 3 times.

How to make the batteries perform longer.

(1) Recharge the batteries before they become completely 

exhausted.

  When you feel that the power of the tool becomes 

weaker, stop using the tool and recharge its battery. If 

you continue to use the tool and exhaust the electric 

current, the battery may be damaged and its life will 

become shorter.

0000Book̲NR1890DBCL.indb   17

0000Book̲NR1890DBCL.indb   17

2017/08/17   15:54:57

2017/08/17   15:54:57

Содержание NR 1890DBCL





























Отзывы: