Hitachi LP-WU9750B, Руководство пользователя

Страница: 34 / 90

34
REMOTE CONTROL
21. HDBaseT
HDBaseT
9
Hotkeys to select the input source - HDBaseT.
22. FREEZE
FREEZE
0
Press this button to freeze the projected image. But
Sound still keep going. Only effect image.
23. NUMBER KEY (0-9)
0 1 2 3 4
5 6 7 8 9
Only availabel for ID Set when these button to be the
number keys.
24. ID SET
ID SET
This function is for set the projector and Remote
control's ID. The projetor can set ID 01-99. After
setup different ID, the remote control will only can
control projector 1 by 1. Can't control other projector.
Press "ID SET + MENU" together for 5 seconds, the
remote control backlight will flash one time, then
prepared the ID Set mode. Press "ID SET + MENU
" for 5 seconds (backlight will flash 1 time) to release
ID Set mode.
After prepared the ID Set mode. press ID SET for 3
seconds. The remote control LED light will start flash
and remote cotrol backlight lights . Mean you can
press number 0-9 to set the projector's ID. Example 1,
press "0" for 1 second (LED light flash 3 times), then
press "1" for 1 second(LED light flash 3 times then
backlight off). success to set the projector ID 01.
Example 2, press "1" for 1 second, then press "9" for
1 second. Success to set the projector ID 19.
Note: This feature is disabled if the device is setting
00 to be the initial value.
25. CLEAR
CLEAR
Press "ID SET + CLEAR " for 5 seconds(Remote
control backlight flash 1 time) to release the ID SET
setting.
CLEAR FREEZE ID SET
HDMI1 HDMI2 DVI-D
ON
FOCUS ZOOM
AUTO
COMPUTER 1 COMPUTER 2 ASPECT
SDI HDBaseT
BLANK STATUS
LENS SHIFT
PATTERN
STANDBY
MENU EXIT
ENTER
1
4
7
0
8 9
6
3
5
2
LED light
Remote control
backlight